BERGQUIST® GAP PAD® TGP 2000
Známé jako Gap Pad® 2000S40
Vlastnosti a výhody
This silicone-based, highly conformable, reinforced gap-filling material is recommended for low-stress applications requiring a mid- to high thermally conductive interface material.
BERGQUIST® GAP PAD® TGP 2000 is highly conformable, so the pad can fill air voids and air gaps with stepped topography, rough surfaces and high stack-up tolerances. It has inherent natural tack on both sides of the material, allowing for stick-in-place characteristics during application and assembly. It’s supplied with protective liners on both sides, and the top side has reduced tack for ease of handling.
Oblasti Použití
Dokumenty ke stažení
Hledáte TS nebo BL v jiném jazyce?
Technické informace
| Barva | Šedá |
| Dielektrická konstanta, @ 1kHz | 6.0 |
| Hodnocení hořlavosti | V-0 |
| Hustota | 2.9 g/cm³ |
| Objemový odpor | 1×10 Ohm m |
| Provozní teplota | -60.0 - 200.0 °C |
| Průrazné napětí dielektrika | 5000.0 Vac |
| Standardní tloušťka | 0.508 - 3.175 mm |
| Tepelná kapacita, ASTM E1269 | 0.6 J/g-K |
| Tepelná vodivost | 2.0 W/mK |
| Tvrdost v jednotce shore, Thirty second delay value, ASTM D2240 Sypká pryž Shore 00 | 30.0 |
BERGQUIST® GAP PAD® TGP 2000
This silicone-based, highly conformable, reinforced gap-filling material is recommended for low-stress applications requiring a mid- to high thermally conductive interface material.