BERGQUIST® GAP PAD® TGP 2000
Conocido como Gap Pad® 2000S40
Características y Ventajas
This silicone based, highly conformable, reinforced gap filling material is recommended for low-stress applications requiring a mid to high thermally conductive interface material.
BERGQUIST® GAP PAD® TGP 2000 is highly conformable, so the pad can fill air voids and air gaps with stepped topography, rough surfaces, and high stack-up tolerances. It has inherent natural tack on both sides of the material, allowing for stick-in-place characteristics during application assembly. It’s supplied with protective liners on both sides, and the top side has reduced tack for ease of handling.
Leer más
Documentos y Descargas
¿Está buscando un TDS o SDS en otro idioma?
Información técnica
| Capacidad calorífica, ASTM E1269 | 0.6 J/g-K |
| Color | Gris |
| Conductividad térmica | 2.0 W/mK |
| Constante dieléctrica, @ 1kHz | 6.0 |
| Densidad | 2.9 g/cm³ |
| Dureza shore, Thirty second delay value, ASTM D2240 Goma a granel Shore 00 | 30.0 |
| Espesor | 0.508 - 3.175 mm |
| Resistencia a la flama | V-0 |
| Resistividad de volumen | 1×10 Ohm m |
| Temperatura de funcionamiento | -60.0 - 200.0 °C |
| Tensión de ruptura dieléctrica | 5000.0 Vac |
BERGQUIST® GAP PAD® TGP 2000
This silicone based, highly conformable, reinforced gap filling material is recommended for low-stress applications requiring a mid to high thermally conductive interface material.