TEROSON® MS 9320
Known as TEROSTAT 9320 4IN1
Features and Benefits
slide 1 of 1
A 1-part, sprayable silane-modified polymer sealant for automotive seams. Allows rebuilding of 4 common automotive OEM textures and comes in different colours.
TEROSON® MS 9320 is a 1-part, black/grey/ochre silane-modified polymer “4-in-1” assembly sealant for seams in the engine compartment, boot and passenger compartment. It’s also suitable for reproducing flat- and wide-stream beads with OEM texture and on larger areas for repairing or substituting PVC-based underbody or stone-chip-protection coatings. TEROSON MS 9320 can be applied by spray or brush and offers good adhesion to metals, primers and top coats. It cures by absorbing moisture from the air to form an elastic material that adheres well to a wide array of substrates without using a primer. Before application, surface pretreatment with TEROSON® VR 10 is recommended.
- Skin-formation time: 10–20 minutes
- Doesn’t contain isocyanates, silicones or PVC
- Good resistance to UV, ageing and weathering
- Spot-weldable before cure
- Fast-curing
- Sprayable and brushable
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Colour | Black, Grey, Ocher |
| Cure rate, 24.0 hr. | 3.0 hr. |
| Key characteristics | Viscosity: high viscosity |
TEROSON® MS 9320
A 1-part, sprayable silane-modified polymer sealant for automotive seams. Allows rebuilding of 4 common automotive OEM textures and comes in different colours.